Paul Thompson
This channel is for:
-Coffee equipment maintenance
- trouble shooting issues
- Coffee advice around coffee equipment
- how to use coffee equipment
Recalibrating your E65SGBW/E80GBW grinder burrs
Changing your Anfim SP II feom micro switch to double cup button
Adjusting hot water temperature on a Black Eagle coffee machine.
Deeper PM clean on a Mahlkonig E65SGBW/E80GBW.
Daily PM Mahlkonig E65SGBW/E80GBW grinder
Adjusting your shout on a Mahlkonig E65SGBW/E80GBW/E80GBS
programming pre infusion/9 bar/post infusion on a Slayer LP
programming 9 bar shot on a Slayer LP
Programming pre infusion with 9 bar shot on a Slayer LP
Replacing a leaking tephlon tube on a Black Eagle AV coffee machine.
Resetting the Disk Distance Detector on your E65sGBW or E80GBW Mahlkonig grinder.
switching Anfim SP2 or Sp2+ micro switch to touch pad buttons if micro switch isn't working
Reset Thermal cutout Switch on an La Marzocco PB
(Beginer level) Milk Integration and Breaking
Calibration wieght off sets on a Slayer LP
Dose cup technique
How to unblocking your coffee machine waste hose.
Programming a shot on your Black Eagle Volumetric Machine
how to remove service message that appears after a deep clean
Slayer LP actuator adjustment
How to fix your Wally when milk jugs can't balance properly
Tips on how to use La Marzocco Wally and maximise good workflow.
How to create your recipe on your La Marzocco Wally.
How to clean your La Marzocco Wally, at the end of each day.
What Milk Jugs you can use on the Wally/what level to fill each Milk jug prior to steaming it.
Factory reset for your E65sGBW /E80GBW Mahlkonig
How to reset maintenance alarm on a Black Eagle coffee machine.
How to clean your Anfim grinder at the end of day.
How to clean you steamwand at end of day
programming you extraction volume's on a LMPB/PBX/KB90