CANDLELIGHT CANABLE CANBOOT CANBUS. 🕯️🟠🌲This is SEASON of the Rapture.Jesus is coming!

𝐀𝐩𝐫𝐢𝐥 𝟒 𝟐𝟎𝟐𝟒
𝐒𝐢𝐦𝐢𝐥𝐚𝐫𝐢𝐭𝐢𝐞𝐬 𝐅𝐨𝐮𝐧𝐝. *𝐓𝐡𝐢𝐬 𝐧𝐨𝐭 𝐦𝐞𝐚𝐧𝐭 𝐭𝐨 𝐛𝐞 𝐩𝐫𝐨𝐩𝐡𝐞𝐭𝐢𝐜, 𝐭𝐡𝐞𝐬𝐞 𝐚𝐫𝐞 𝐜𝐥𝐮𝐞𝐬. *𝐏𝐥𝐞𝐚𝐬𝐞 𝐮𝐬𝐞 𝐲𝐨𝐮𝐫 𝐨𝐰𝐧 𝐝𝐢𝐬𝐜𝐞𝐫𝐧𝐦𝐞𝐧𝐭, 𝐲𝐨𝐮𝐫 𝐜𝐨𝐧𝐜𝐥𝐮𝐬𝐢𝐨𝐧𝐬 𝐚𝐫𝐞 𝐲𝐨𝐮𝐫 𝐨𝐰𝐧. 𝐓𝐡𝐚𝐧𝐤𝐬. •ᴗ•

This morning I felt compelled to look at the GitHub website again, which I shared a few days ago, but this time under Arksine/katapult.
𝐊𝐚𝐭𝐚𝐩𝐮𝐥𝐭 (𝐟𝐨𝐫𝐦𝐞𝐫𝐥𝐲 𝐤𝐧𝐨𝐰𝐧 𝐚𝐬 𝐂𝐚𝐧𝐁𝐨𝐨𝐭)
https://github.com/Arksine/katapult

Moonraker
https://github.com/Arksine/moonraker


I found some similarities to the last video I posted a couple days ago, specifically the picture of the banner with the candles, but I have added the picture in this video, also.

Previous video:
   • LOOM  Numbers 1203 and 2464.  Be Save...  

𝐓𝐡𝐢𝐬 𝐢𝐬 𝐭𝐡𝐞 𝐞𝐱𝐜𝐞𝐫𝐩𝐭 𝐭𝐡𝐚𝐭 𝐠𝐨𝐭 𝐦𝐲 𝐚𝐭𝐭𝐞𝐧𝐭𝐢𝐨𝐧 𝐚𝐭 𝐭𝐡𝐞 𝐛𝐨𝐭𝐭𝐨𝐦 𝐨𝐟 𝐀𝐫𝐤𝐬𝐢𝐧𝐞/𝐊𝐚𝐭a𝐩𝐮𝐥𝐭 𝐩𝐚𝐠𝐞:
It is recommended to use a USB-CAN device flashed with candlelight, such as a Canable. Alternatively, a device that supports Klipper's USB-CAN bridge mode works well.
The BTT U2C v2.1 CAN device requires the latest firmware. The binary can be found in the U2C repo and the source can be found at BTT's candlelight fork.
If using a MCP2515 CAN device (ie: Waveshare RS485 CAN HAT) it is possible that packets will be dropped when reading flash back from the node during the verification process. That said, I have successfully tested the 12 MHz Crystal variant with the recommended settings.
Details on the protocol used to communicate with the bootloader may be found in protocol.md.

𝐊𝐥𝐢𝐩𝐩𝐞𝐫 𝐂𝐥𝐢𝐩𝐩𝐞𝐫 𝐃𝐞𝐟𝐢𝐧𝐢𝐭𝐢𝐨𝐧
"Klipper can perform calculations at a significantly faster rate compared to onboard microcontrollers. Faster calculations translate to smoother and more precise movements of your 3D printer's motors. Improved precision results in higher print quality and reduced print times."
Clipper: https://www.merriam-webster.com/dicti...
https://www.klipper3d.org/

𝐍𝐮𝐦𝐛𝐞𝐫 𝟕
In this video, the number 7 appears in the photo, at the bottom righthand corner. I forgot about it in the previous video, and cropped that part out of the picture, so you couldn't see it. You can see it now in this video.
https://www.crosswalk.com/faith/bible...

𝗦𝗔𝗟𝗩𝗔𝗧𝗜𝗢𝗡 𝗧𝗛𝗥𝗢𝗨𝗚𝗛 𝗝𝗘𝗦𝗨𝗦 𝗖𝗛𝗥𝗜𝗦𝗧 𝗜𝗦 𝗔 𝗙𝗥𝗘𝗘 𝗚𝗜𝗙𝗧 !-
𓆩
𓆩✞❤‍🔥 God loved the world this way: He gave his only Son so that 𝐞𝐯𝐞𝐫𝐲𝐨𝐧𝐞 𝐰𝐡𝐨 𝐛𝐞𝐥𝐢𝐞𝐯𝐞𝐬 𝐢𝐧 𝐡𝐢𝐦 𝐰𝐢𝐥𝐥 𝐧𝐨𝐭 𝐝𝐢𝐞 𝐛𝐮𝐭 𝐰𝐢𝐥𝐥 𝐡𝐚𝐯𝐞 𝐞𝐭𝐞𝐫𝐧𝐚𝐥 𝐥𝐢𝐟𝐞. John 3:16 GW


꒰ঌ ( ＾◡＾) ໒꒱ ~~~~~~~~ ❤️🌈♾️