How to Replace Front Lower Control Arm 2008-2013 Nissan Rogue

Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com https://trq.video/ia-1ASFK02291
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF01391
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF01392

This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2008-2013 Nissan Rogue. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This repair was done on a 2009 Nissan Rogue S 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

Tools you will need:
• Pry Bar https://trq.video/oRI-1AXAA00020
• 18mm Wrench
• 20mm Wrench
• 18mm Socket
• 21mm Socket
• Pickle Fork
• 1/2 Inch Impact Gun
• Ratchet
• Socket Driver
• Socket Extensions
• Torque Wrench https://trq.video/oaAw-1AXAA00044
• Gloves https://trq.video/oXA-1AXSS00048
• Safety Glasses
• Chisel
• Floor Jack
• Hammer
• Jack Stands
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Nissan Rogue 2008-13 1st Generation:    • Nissan Rogue 2008-13 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.