How to Replace Steering Knuckle 2011-2018 Ram 1500

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-381-i

This video shows you how to install a steering knuckle on your 2011-2018 Ram 1500.

This repair was done on a 2016 Ram 1500 Big Horn 5.7L Crew Cab Pickup 4-Door 4WD and the process should be similar on the following vehicles:
2011 Ram 1500
2012 Ram 1500
2013 Ram 1500
2014 Ram 1500
2015 Ram 1500
2016 Ram 1500
2017 Ram 1500
2018 Ram 1500

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oaWx-1AXAA00013
• 19mm Socket
• 21mm Socket
• 22mm Socket https://trq.video/ojs-1AXAA00266
• 27mm socket https://trq.video/oD-1AAST00007
• 35mm Socket https://trq.video/o5-1AAST00005
• Brake Caliper Hanger https://trq.video/ob-1AXAA00439
• Trim Tool Set https://trq.video/oQZ-1AXXX00006
• Side Cutters
• 3/8 Inch Breaker Bar
• Ratchet https://trq.video/oa9V-1AXAA00016
• Torque Wrench https://trq.video/oaf6-1AXAA00044
• Anti-Seize Grease
• Bungee Cord
• Copper Anti-Seize
• Gloves https://trq.video/osE-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oMx-1AXAA00068
• Hammer
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Ram 1500 3rd Generation 2011-2018:    • Ram 1500 3rd Generation 2011-2018  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.