Nissan NV200 Van Conversion | Swivel Seats pt.2 | Driver's seat | Van life

In this video we install a swivel plate onto the driver's seat, so both seats can turn around.
To do this we had to undo some of the work we did on the passenger swivel. Here's a rough bullet list of what we did to get the swivels to work:

1. Had the handbrake moved forward and down by a friendly neighbourhood mechanic so the swivel could clear it. Took the casing off the handbrake.
2. Took seat brackets off the passenger seat and put them on driver's seat plate to raise it up (The driver's side did not have the same seat brackets)
3. Removed the small seat brackets that were attached to the driver's seat runners
4. Attached the swivel plate to the seat base
5. Attached the driver's seat to the swivel plate via the runners
6. Attached the passenger seat with swivel plate straight onto the passenger seat base (this was much easier to do without the brackets)

This was a complicated job and we messed up a few times along the way. But we muddled through and by the end we had two functioning swivel seats, which we're going to use to form part of our bed.

Check out our first video if you're looking to turn your passenger's seat into a captain's chair:    • Nissan NV200 Van Conversion | Swivel Seats...  

What we used:

-Swivel plates: https://www.swivel-seats.com/product/...

Thanks for watching!

Music: bensound.com