How To Replace Rear Wheel Bearing and Seal 1992-99 GMC K1500

Buy Now!
New Wheel Bearing & Seal Kit from 1AAuto.com https://trq.video/ia-1ASHS00841

If you hear a grinding or groaning noise while your vehicle is rolling, it might have a worn out wheel bearing. A worn bearing can allow the wheel to wobble, creating a host of other issues. To save yourself from more headaches down the road, replace your bearing right away. For solid rear axles, you'll need to replace the axle seal too. This video shows you how to install a new TRQ wheel bearing and axle seal on your 1988-2002 GMC K1500.

• Check here for more videos on the 1988 to 2002 GMC K1500 Sierra:    • GMC K1500 Sierra 1988-1999 4th Gen  

This repair was done on a 1995 GMC K1500 Sierra SLE 5.7L Extended Cab Pickup 2-Door 4WD and the process should be similar on the following vehicles:
1988 GMC K1500
1989 GMC K1500
1990 GMC K1500
1991 GMC K1500
1992 GMC K1500
1993 GMC K1500
1994 GMC K1500
1995 GMC K1500
1996 GMC K1500
1997 GMC K1500
1998 GMC K1500
1999 GMC K1500

Tools you will need:
• Pry Bar https://trq.video/oD-1AXAA00020
• 13mm Socket https://trq.video/oay-1AXAA00015
• 22mm Socket https://trq.video/om-1AXAA00266
• 8mm Socket https://trq.video/oan-1AXAA00017
• Bearing Race and Seal Driver https://www.1aauto.com/*/i/1axaa00038...
• Slide Hammer
• 3/8 Inch Socket https://trq.video/oaT-1AXAA00016
• 3/8 Inch Drive Ratchet https://trq.video/oay-1AXAA00015
• Ratchet https://trq.video/oaT-1AXAA00016
• Socket Driver
• Socket Extensions https://trq.video/oay-1AXAA00015
• Torque Wrench https://trq.video/oae-1AXAA00044
• Gear Oil
• Liquid Thread Locker
• Paper Towels https://trq.video/ou-1AXSS00035
• RTV
• Rust Penetrant
• Safety Glasses
• Chisel https://trq.video/og-1AXAA00055
• Drain Pan
• Floor Jack https://trq.video/oL-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oK-1AXAA00065
• Razor Blade / Gasket Scraper
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
GMC K1500 Sierra 1988-1999 4th Gen:    • GMC K1500 Sierra 1988-1999 4th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.