etrailer | 3-Way RV Water Heater Bypass Valve Review

Click for more info and reviews of this JR Products RV Fresh Water:
https://www.etrailer.com/RV-Fresh-Wat...
Check out some similar RV Fresh Water options:
https://www.etrailer.com/dept-pg-RV_F...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-JR-P...
Michael: Hi there, I'm Michael with etrailer.com. Today, we're going to take a quick look at the 3-Way Diverter Valve by JR Products. This is going to sit in line with your current plumbing situation and give you more control over the flow of your fluids, which will be especially beneficial if you are hooking this up into an RV. You can use it to make sure that your antifreeze is going to your hot water tank to get that winterized.This is going to have three different nozzles here. We're going to have two of these male half-inch NPT fittings. That NPT fitting size is pretty common, so it should work for most setups.

Then, we're going to have one half-inch female NPT fitting. If you already have a male NPT threaded pipe, you can hook that in on there. Of course, we've got our diverter valve latch handle there. When we have it down in the horizontal position like that, it's going to allow our fluids to flow through horizontally. When we raise it into the vertical position, it's then going to divert the fluids up, so give us more control over where it is flowing.Because it is a brass construction, it is going to be resistant to rust and corrosion.

We won't have to worry about that. Should do a good job for us and make things a little bit easier when it comes to winterizing our camper. That's going to complete our look at the 3-Way Diverter Valve..