KANDY BOX PART 1 - diy Jack In The Box Halloween prop

This is a diy tutorial for a Halloween Jack in the Box prop feraturing Kandy Clown from Evil J's Creepy Closet. We call this "Kandy Box"
#eastpointnecropolis #eviljscreepycloset #halloweenanimatronics #halloween #diyhalloween

ambient audio : Laughing Jack Theme - Pop Goes the Weasel (Creepy Piano) by Myuu @Myuu
prop controller: Frightprops Picoboo Plus https://www.frightprops.com/
@FrightProps
Kandy Clown prop head by Eville J's Creepy Closet https://www.evillejs.com/
@evillejscreepycloset7829

Kandy Box parts list
FRAME:
PVC:
◦ (3) 10’ x 1” pipe
◦ (4) 1” Tees
◦ (8) 1” 3/way fitting 12Pack 3-Way PVC Fittings,1"... https://www.amazon.com/dp/B08L5DS7XT?
ref=ppx_pop_mob_ap_share
◦ 2’ x 1/2” pipe
◦ (2) 1/2” caps
◦ (1) 1/2” 90° elbows
(1) 1/2” 90° street elbow
You’ll need a m8 tap with a 17/64 or 6.75 mm drill bit to tap the pvc cap. https://a.co/d/aJC0KpS
(2) 2’x4’ sheets 1/4” plywood from hardware
(3) 8’ x1”x2” pine or poplar
Motor:
Any 12v wiper motor https://www.frightprops.com/dual-spee...
10 amp speed control https://a.co/d/d36ckWd
Pneumatics:
◦ 25mm bore x 150mm stroke pneumatic cylinder
◦ 12v pneumatic 5way solenoid valve TAILONZ PNEUMATIC 1/8"NPT... https://www.amazon.com/dp/B08SHKNPDQ?
ref=ppx_pop_mob_ap_share
◦ (2) pneumatic flow control silencers
Mtsooning 10PCS Pneumatic Exhaust... https://www.amazon.com/dp/B07D47VNKP?...
◦ 1/4” airline tubing kit with ball valve https://a.co/d/ioIV5v
Controller
◦ Fright props piccolo plus https://www.frightprops.com/picoboo-p...
◦ 5 or 10 amp power supply https://a.co/d/1wLvMG3
° Fright props Pir motion sensor https://www.frightprops.com/prop-cont... or optional Purgatory
Props Pir sensor https://purgatoryprops.com/electronic...
◦ 18awg
https://a.co/d/6nfMjcl
Fog machine with push button
https://a.co/d/aU5uADF