Fusion 360 - 3D Modeling Rep no. 29

In this exercise we perform simple modeling in Autodesk Fusion 360.

Chapters
00:00 Intro with 2D drawing
00:26 Entire profile in one sketch
03:08 First extrusion
03:19 Second extrusion
03:28 Third extrusion
03:37 Final extrusion
03:52 Adding fillets
04:06 Create a circular pattern using the outer circle
04:29 Adding final fillets



🔥🔥If you have found this video useful and would like to support me, you can buy me a coffee at
https://www.buymeacoffee.com/CADjungle

If you read the about section, these exercises are intended to help you become familiar with Autodesk Fusion 360 through repetition. These models are not always exact but, are measured for approximation. They also may not always be real word examples, but a guide in software use. When attempting to reproduce models for 3D printing, be sure to verify your own real world measurements for authenticity.
If you enjoy this content, please like and subscribe for more upcoming and progressive videos.

I do not work for Autodesk and currently do not get paid to promote their software.

This channel is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc