How to Replace Front Lower Control Arms 2000-2007 Ford Taurus

Buy Now!
New Control Arm Set from 1AAuto.com https://trq.video/ia-1ASFK00143
New Control Arm from 1AAuto.com https://trq.video/ia-1ASLF00087
New Control Arm from 1AAuto.com https://trq.video/ia-1ASLF00088

This video shows you how to install new front lower control arms from TRQ on your 2000-2007 Ford Taurus. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.

Estimated installation time for a professional technician is approximately: 1 hour 30 minutes

This repair was done on a 2006 Ford Taurus SE 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Taurus
2001 Ford Taurus
2002 Ford Taurus
2003 Ford Taurus
2004 Ford Taurus
2005 Ford Taurus
2006 Ford Taurus
2007 Ford Taurus

Tools you will need:
• Pry Bar https://trq.video/oaop-1AXAA00020
• 18mm Flare Wrench
• 21mm wrench
• 17mm Socket
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 29 mm socket
• Ball Joint Press
• Induction Heater
• Needle nose pliers
• Needle nose pliers
• Wire Cutters
• Ratchet
• Socket Extensions
• Torque Wrench https://trq.video/obL6-1AXAA00044
• 3/8 Inch Wrench
• Block of Wood
• Bungee Cord
• Cloth Rags
• Gloves https://trq.video/ob9L-1AXSS00048
• Safety Glasses
• 6mm Hex Socket
• Hammer
• Magnet - Extendable
• Pick https://trq.video/oahs-1AXAA00037
• Pole Jack
• Punch
• Ratchet Strap
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Ford Taurus 4th Generation 2000-2007:    • Ford Taurus 4th Generation 2000-2007  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.