Heretic H2 | 10 Blade Grind Part 8 | Grinding Side 2 Bevel

Available soon at www.belnapcustomknives.com

The Multi Guide Pro has a well established history and is a mature design with many capabilities demonstrated and many more capabilities yet to be uncovered. The latest redesign is a major leap forward in terms of quality and increased utility over the previous version.
Blank material 80crv2 post heat treat.

This is where I pull ahead of the competition in the area of guide making. I have a proven tool and well proven method to successfully use the tool. Other makers of guides similar to my design only show grinding on a piece of bar stock or only on one side of the blank. I have even asked several of them to demonstrate actually grinding a full two sided knife. So far non have done it. Being able to grind a bevel on a thick piece of bar stock or to only grind the bevel on one side of a blank is far from being able to grind a finished knife they way I do. With my demonstrations there is absolutely nothing hidden in the process.

For grind of side 1 bevel see Part 7

00:00 Begin grind
00:32 Setting plunge location
01:48 Begin begin main bevel grind process. 7600 SFPM belt speed
02:35 Show grind progress
02:58 Check grind progress with dividers
03:28 Check grind progress with dividers
03:52 Check grind progress with dividers
04:14 Check grind progress with dividers
05:05 Begin target grind technique along bottom middle of bevel to bring it up to match tip
05:25 Begin final plunge cut to match plunge of side 1 bevel
07:45 Begin 400 grit grind