How tor Replace Front Bumper Cover 2005-2010 Chrysler 300

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-59-aX

This video shows you how to install a new TRQ bumper cover on your 2005-2010 Chrysler 300. TRQ bumper covers are exact replacements for your vehicle's factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!

This repair was done on a 2005 Chrysler 300 C 5.7L Sedan 4-Door RWD Automatic and the process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oa59-1AXAA00013
• Phillips Head Screwdriver https://trq.video/oa59-1AXAA00013
• 10mm Socket https://trq.video/oaQD-1AXAA00017
• 13mm Socket https://trq.video/oa8f-1AXAA00015
• 7mm Socket https://trq.video/oaQD-1AXAA00017
• Trim Tool Set https://trq.video/oXp-1AXXX00006
• T20 Driver
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet https://trq.video/oaQD-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/oa8f-1AXAA00015
• Gloves https://trq.video/oDy-1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

Check out our playlist:
Chrysler 300 1st Generation 2005-2010:    • Chrysler 300 1st Generation 2005-2010  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.