Keep Brake Line Fittings in Place

In the early years of the automobile, brakes were typically mechanical and operated by a lever or pedal that applied pressure to a series of rods and cables to engage the brakes. These systems were often unreliable and required significant physical effort to operate effectively.

🔧 Get new tips for your classic car when you sign up for the CCRC newsletter. You'll receive the latest videos, articles, and more straight from the experts! https://bit.ly/3DyfXrp

The development of hydraulic brakes can be attributed to Malcolm Loughead (later changed to Lockheed), who patented the hydraulic brake system in 1917. This system used a master cylinder to generate hydraulic pressure and transmit it to the wheel cylinders, which applied the brakes. It provided more consistent and reliable braking performance compared to mechanical systems.

The first production car to feature hydraulic brakes was the 1921 Duesenberg Model A. This marked a significant advancement in automotive braking technology, as hydraulic brakes offered improved braking power and better modulation, making driving safer and more comfortable. Throughout the 1920s and 1930s, hydraulic brakes gained popularity and became more widely adopted in the automotive industry. Various companies, including Lockheed, Bendix, and Dunlop, contributed to advancements in hydraulic brake technology, refining the design and improving performance.

Are you a restoration enthusiast looking to learn more about classic cars? Sign up for the free CCRC newsletter to receive the latest tips and tricks from our experts! ⚙️ https://bit.ly/3DyfXrp

Thanks to these early pioneers and manufacturers the evolution of the automobile became safer and more reliable, but their innovations have largely remained mostly unchanged nearly a century later. That includes the need to bend and route brake lines from a master cylinder to each wheel.

Bending brake lines can be fun and rewarding but sometimes it can be equally frustrating. One of the biggest frustrations occurs when you have bent up the perfect brake or fuel line and realize the fitting that should be at the end of the tube has somehow migrated to the middle or even the other end of the line. Most often the line needs to be straightened to slide the brake line fitting back to its correct location. Yes, it can be done but re-bent lines never look quite as nice the second time around. Mark Simpson shares some helpful tips to keep those brake line fittings in place while bending lines.