PSN-19. Press for Sneaker and Shoe with Cap-Sole Repair and Manufacture PSN-19.

This press is intended for the repair and production of sneakers, shoes and boots with bowl-shaped soles from 6 to 16 men's sizes. During pressing its diaphragm simultaneously pushes against and the bottom of the sole as well as the part that surrounds the upper of the shoe. The clamping force is adjustable and can be up to 15 psi.
The press сonsists from the base, the air unit and the rack with a movable prop on it. On the base are located (from left to right): a pressure gauge showing the air pressure at the input of the press; pressure regulator in air unit; a gauge which shows in the air unit either a vacuum or a pressure in the air unit; 3-position switch, providing in the air unit either or vacuum or pressure. On the left side wall there is a connector for connection hose from the compressor.

This press is intended for the repair and production of sneakers, shoes and boots with bowl-shaped soles from 6 to 16 men’s sizes. During pressing its diaphragm simultaneously presses against and the bottom of the sole as well as the part that surrounds the upper of the shoe. The clamping force is adjustable and can be up to 15 lbs/square inch (1,2 kg/square cm.)

https://www.shoe-tools.com

https://www.ebay.com/itm/186489109301