Foldable R2D2 CR10 long

FAB365 is creating a new 3D printing culture in which 3D printing researches new technologies and shares them with 3D printing users at low cost. FAB365 has grown considerably with the love of our customers. And with the involvement and love of our customers, the design of FAB365 has spread and FAB365 has grown considerably. That's why we have a big gift for our customers who love the design of FAB365. It is a foldable R2D2 that many fans love.

https://fab365.net/items/181

The folding process is as follows:
1) First, connect the sides of the body by inserting a small protrusion. The protrusions are small, making them slightly difficult to fit.
2) Then insert the top and bottom parts.
3) Pull the arm outward and lower it down to fix it.
4) Cut and fit the filament on the feet to represent the cable. Cut to 26 mm long and fit it on top. At the bottom, cut the filament by 33mm and insert it.
5) Put the feet made under the arms and body, this robot is completed.

The finished R2D2 can rotate its head and move its arms back and forth. There's a device inside the arm that doesn't go beyond the most appropriate angle.

Once again, I would like to thank 3D printing users for creating a healthy 3D printing culture and I will continue to make good designs in the future.

Bed/plate - Whambam system https://whambam3d.com/collections/fle...

When expanded, size = X 196mm, Y 98mm, Z 61mm After folding X 72mm, Y 50mm, Z 108mm