Install LR3 new sunroof drain

Short video for installing new sunroof drain on LR3 LR4.

Steps:

Left Hand Drive

1. Remove side vent and rubber wind flow diverter from front right fender.
2. Remove passenger side kick panel
3. Remove passenger side trim under glove box
4. Removed glove box
5. Remove CBJ
a: Remove front 3 electrical connectors
b: Remove bottom electrical connector
c: Remove 2 10mm nuts securing the CBJ
d: Remove 2 electrical connections in rear of CBJ, take notice of how lever to remove each connection works and which color connection goes to which site
6: Remove A-piller interior trim with 30mm Torx
7: Remove passenger side front grab handle
8: Remove passenger side sun visor
9: Put long tool down dash along side existing sun roof drain
10: Locate tool near where CBJ was
11: Tape new drain line to tool and pull up
12: Insert new drain line's elbow into hole of front fender
13: Remove old drain line
14: Install new drain line where original drain line was secured in A-Pillar and insert onto nipple of sunroof.

May have to use heat gun and needle nose pliers to expand new drain line so it fits all the way onto nipple of sun roof