NEW ToolkitRC M6AC PRO V2 Dual 800W RC Model Charger Review, 新款双路大功率模型充电器开箱测评

There are two upgraded versions of this M6DAC, PRO and V2. Their built-in power differs by 100W, the PRO version is 300W, and the PRO version has a mobile phone wireless charging function. Although it is only 10W, it is still very useful for emergency temporary power replenishment in the field.
Its appearance style has always been the design feeling of ToolkitRC. The overall black matte engineering material shell is matched with the glossy panel tilted on the front, which is full of texture. The buttons and the wave wheel feel very good and the materials are solid. There are two outputs on the front, and the back is AC input, DC input and 65W Typec output.
In terms of functions, it covers almost all types of batteries on the market, and has four common modes: charging, discharging, storage and destruction. It can enable multiple functions such as battery selection, synchronous charging mode, and continuous mode. The built-in 300W power can charge two 6S 5000mAh batteries at the same time at a 1C charging rate, which is sufficient for outdoor use. In general, this M6DAC PRO version can be regarded as a multi-functional charger that can be done in one step.

这款M6DAC的升级版一共有两款，分别是PRO和V2版，他们的内置功率相差100W，PRO版为300W，并且PRO版带手机无线充电功能，虽然只有10W，但外场应急临时补电还是很有用的。
它的外观风格一直是ToolkitRC的设计感觉，整体黑色的磨砂工程材质外壳，搭配上正面倾斜的光面面板，质感十足。按键和波轮手感很好，用料扎实。正面有两路的输出，背面则为交流电输入、直流输入和65W的Typec输出。
功能上它覆盖了市面上几乎所有的电池种类，并且有充电、放电、存储和销毁四个共模式，可开启电池选择、同步充电模式、连续模式等超多功能。内置300W的功率可以给两块6S 5000mAh电池同时到达1C的充电倍率，外场使用也足够。总的来说，这款M6DAC PRO版算得上是可以一步到位的多功能充电器。