Wire wrap pendant tutorial.

Hello and welcome to my latest tutorial.

To make this pendant you will need -
• 0.8mm wire (20g), 4 x 12" (30cm) 1 x 6" (15cm)
• 0.3mm weaving wire (28g) 250cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• Most shapes will work with this design, mine is a heart-shaped puffy cabochon 20mm by 20mm (you can use a similar size, remember to adjust wire length and weave repeats accordingly)
• Small stone, mine is a 7mm pointy back cabochon.
• 4mm bead (or similar).

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Prestige flat-nose nylon jaw pliers
• Beadsmith bail pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)

My Etsy shop - https://www.kellyjonesjewellery.etsy.com
Facebook -   / kellyjjewellery  
IG - kellyjjewellery

Thanks for watching x

Music is free from YouTube;
Invisible Beauty - Aakask Gandhi


©2023 Kelly Jones Jewellery All Rights Reserved

Please do not copy or share this content!
This content is created for me (Kelly Jones Jewellery) to promote my tutorials.
Do not share or reproduce this content in any format.
Thank you!