The Deployment of IP PBX & IP Phones in Local Area Network

How to deploy an IP PBX together with an IP phone, and a SIP trunk in the #LAN? - This is the FAQ from many of our end users.

Therefore, in this video, we’ll walk you through the deployment of IP-based devices to build up a #VoIP telephone system in the office. We will make use of the following devices: a switch connected to the local router, a Yeastar S300 VoIP PBX, a Yealink IP phone, and a laptop for configuring all these devices.

—————————————

Chapters

00:00 IP PBX in LAN
00:18 What is LAN?
01:18 Task 1: Set the network interface of the device.
03:15 Task 2: Connect the LAN port of the #PBX to the switch, and connect the laptop to the switch.
03:44 Step 1: Connect the IP phone and switch with the port internet
03:55 Step 2: Configure the SIP dedicated trunk on Yeastar PBX
05:21 Step 3: Connect the network cable to the WAN port of PBX
05:28 Step 4: Configure the static route on the PBX
Last but not least: Reboot the PBX to make all configurations work.

If you would like to know more about Dedicated SIP Trunking on Yeastar S-Series VoIP PBX, please go to our online document center here: https://bit.ly/2E0uPmr

—————————————

Subscribe to Yeastar's YouTube Channel: https://bit.ly/46kiZuc

Visit Yeastar's website: https://bit.ly/3GqEbEn
LinkedIn:   / yeastar  
Facebook:   / yeastar  
Twitter:   / yeastar  
Instagram:   / yeastar_official