PHOTON - Electronics

This video will detail the electronics used in the Photon: motor and propeller, ESC, receiver, servos, and extensions. Below are parts and sources for the parts on this plane. I have ordered each of these parts from the sources listed. I do not specifically recommend any particular seller but have had good experiences with each of these. Other sources do exist, and all sellers have their advantages and disadvantages.

MOTOR: (I have chosen a small, high kV motor for high wattage and small propeller. There are many other options for motor and prop combinations on this plane)
http://www.hobbyking.com/hobbyking/st...
http://www.rctimer.com/index.php?gOo=...

PROPELLER:
Preferred: http://www.hobbyking.com/hobbyking/st...
OK: http://www.rctimer.com/index.php?gOo=...

ESC: (30 amp is usually OK, for a few more $'s I usually opt for a 40 amp)
*program the ESC brake to ON*
http://www.hobbypartz.com/60p-dye-100...
http://www.rctimer.com/index.php?gOo=...

BATTERIES: (options are too numerous to list - here are a couple of my favorites)
http://www.hobbyking.com/hobbyking/st...
http://www.hobbypartz.com/77p-sl2200-...

SERVOS:
Digital, metal: http://www.hobbypartz.com/9gexidimege...
Analog, metal: http://www.hobbyking.com/hobbyking/st...
Analog, plastic: http://www.hobbyking.com/hobbyking/st...
http://www.rctimer.com/index.php?gOo=...

SERVO EXTENSIONS:
http://www.hobbyking.com/hobbyking/st...
http://www.rctimer.com/index.php?gOo=...

RECEIVER:
Too many options to discuss here. Be sure you have at least 4 channels if using straight ailerons with a Y-harness, 5 channels if using flaperons. I strongly recommend good receiver antenna placement and/or addition of a well-placed satellite receiver.