Wiring Robby the Robot

This is my walkthrough video for wiring up Robby the Robot's various internal mechanisms.
Associated files are located on my shared drive here: https://robby.ogrinz.com (see the sub-folder on "Internal Wiring")

Every Robby replica will be different in both construction and purpose. My goal in this video was to make sure that the controls and power for my Robby were flexible for both "suit" and "display" modes. Your needs may be entirely different, but feel free to use this as a starting point for your creation.

Robert Bertie's store can be found here: https://www.redbubble.com/people/bryd...

Parts Used:
Telephone handset cord: https://www.amazon.com/dp/B07VCQTY4W
Handset adapters: https://www.amazon.com/dp/B093Q46KBZ
Black felt (for lining inside of hand-control holer): https://www.amazon.com/dp/B0CZXY1W29
Protoboard: https://www.amazon.com/dp/B07ZNZVDL6
USB Power Splitters: https://www.amazon.com/dp/B07CKQSTCB
USB Power Packs: https://www.amazon.com/dp/B094Y1R46V
USB Pigtail Connectors: https://www.amazon.com/dp/B0CRQTYV9H
Multicolor Silicone Wire (22 AWG): https://www.amazon.com/dp/B0881HCN37
10pin Molex Connector: https://www.amazon.com/dp/B074LYZKMS
ESP32 (3-pack): https://www.amazon.com/ESP-WROOM-32-D...
Arduino Nano (3-pack): https://www.amazon.com/AYWHP-ATmega32...