How to replace the front shock absorbers Logan mk1 ➿

BUY THE AUTO PARTS you need for the operation : 👉 http://bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 http://bit.ly/MCD12AppStore, 🤖 : http://bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠

Needed parts:
Suspension strut support bearing : https://maclede12.co/suspension-strut...

Shock absorber : https://maclede12.co/shock-absorberbo...

Penetrating oil : https://maclede12.co/Penetratingoilen

Spring

💪 TIGHTENING TORQUES FOR FRONT SHOCK ABSORBERS DACIA Logan mk1
Shock absorber head nut : 62 Nm
Shock absorber base holding bolt : 105 Nm
Shock absorber top fastening bolt : 44 Nm

Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Front shock absorbers on a Dacia Logan mk1 .

Discover the world of UseTool EN on

Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your Logan mk1 : https://maclede12.co/toolboxCLASOS3050en 🏆🤖💣

6mm Allen socket
Socket wrench
Wheel lug wrench
10mm socket
18mm socket
21mm socket
27mm socket
Vice
Wire brush
Impact wrench
27mm Offset wrench
Breaker bar
Torque wrench: https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS...
Spring compressor: https://maclede12.co/springcompressor...
Shock absorber head removal kit: https://maclede12.co/shockabsorberhea...

🔝💪Safely lift your Logan mk1 with the hydraulic jack: https://maclede12.co/jackCLASOH5304en and axle stands: https://maclede12.co/standsCLASOM3002... recommended by UseTool EN 💪🔝

Hydraulic jack
Axle stand

🚗📢💡 RESOURCES 💡📢🚗

Usetool's warnings
We advise never replacing just one shock absorber, to make sure you drive we the most balanced vehicle possible.

Be careful during the spring compression stage, it may be risky and requires careful attention. Fix the tool in a vice, this will make it easier to use.

Usetool's info
During this operation, you will work on the steering system of your car.

When you change the shock absorbers in your vehicle, you should carry out a tyre alignment.

📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
[ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely :    • How to (PROPERLY) lift your vehicle safely...  

[ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel :    • ASTUCE : Pneu crevé ? Déposer et reposer u...  

[ USETOOL'S TIPS & TRICKS ] How to (PROPERLY) use a torque wrench? 🔧 :    • How to (PROPERLY) use a torque wrench? 🔧  

Space Race by tubebackr |   / tubebackr  
Music promoted by https://www.free-stock-music.com

Terms and conditions of the offer : https://www.mister-auto.co.uk/operati...

Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.

0:00 Intro
0:15 Remove the shock absorber
3:30 Set the new shock absorber up
6:46 Replace the shock absorber