Vingli Adirondack Chair Assembly (Step-by-Step Guide)

Hey, you can pick up this chair at the following Amazon Link: https://amzn.to/3Ti8gwc
“Some links are affiliate links which means I may earn a commission at no extra cost to you.”

How to Assemble the Vingli Adirondack Chair (Step-by-Step Guide)
Vingli Adirondack Chair Assembly | Full DIY Walkthrough
Unboxing & Building the Vingly Adirondack Chair – Tips, Tools, and Troubleshooting

Just picked up a Vingli Adirondack Chair and not sure where to start? This full step-by-step guide walks you through the entire assembly process — from unpacking the parts to tightening the final screw. Whether you're putting together one chair or a whole set, this video will help you save time, avoid common mistakes, and get the most out of your new chairs.

🔧 Tools you'll need:
Phillips-head screwdriver
Ratchet with 10mm and 13mm sockets
Power drill (optional, but highly recommended)
Scissors
2x4 or straight edge (to align the back slats)

🪑 In this video, you'll learn:
How to identify and organize labeled parts
Step-by-step installation of the seat, back, arms, and legs
Tips for dealing with broken dowels or mislabeled pieces
Common pitfalls to avoid (like over-tightening screws or dealing with tight fits)

⚠️ Note: Some wood pieces may arrive cracked or misaligned. I show how to work around these issues so you can still get a great finished product.

👍 If you found this video helpful, please like and subscribe for more DIY assembly tutorials!

0:00 - Introduction
0:28 - Necessary Tools
1:40 - Unpacking the contents
4:00 - Step 1 - Install the seat
11:00 - Step 2 - Install the back
16:10 - Step 3 - Install the legs
19:30 - Step 4 - Install the arms
23:28 - Step 5 - Connect the back
26:50 - Step 6 - Finish the look
28:48 - Folding and function!