Tech Tip | Switching Tape Guides | Triad Extreme
Автор: Miller Weldmaster
Загружено: 2024-10-30
Просмотров: 360
Website: https://www.weldmaster.com
Machine Page: https://www.weldmaster.com/triad-extr...
One thing you'll need is a small Phillips head screwdriver. First thing you're going to do, once you have the housing off of the machine, is you're gonna look and see these two screws down here. So you're just gonna take those out, and then this piece will come off of your guide. After the screws are out, there are two pins that you need to pull this piece off of. Normally, they're pretty tight. Best solution is to can grab a flat head and pop your old piece out.
If issues are still occurring. Please visit our website at www.weldmaster.com or call into our office at 330-833-6739 for any additional support. You can also schedule a service visit from one of our highly qualified Service Technicians. Thank you for tuning in and thank you for choosing Miller Weldmaster for all of your welding needs!
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
