LOGIC SW Function of AT10II/AT9S Pro

LOGIC SW Function of AT10II/AT9S Pro
Take AT10II as an example.
Long press MODE button to enter basic menu--LOGIC SW.
LOGIC SWITCH is to combine two switches to control one function or one channel.
At most 3 logic switches can be set. Take logic switch 1 as an example.
SW: We can set throttle stick, SWA, SWB to SWH to work together.
POSITION is the position of the switch.
I want to combine SWA and SWD to show the logic switch function. So I set SWA and SWD for the two switches.
For position, I can set DOWN for both SWA and SWD. (文For 3 position switches, you can also set central position.)
And here are two modes for logic switch, including And mode and or mode.
When the mode is set to "x/and", the logic switch is enabled only when both two switches are in the set position;
When the mode is set to "+/or", the logic switch is enabled as long as any one of the two switches is in the set position.
That is to say, if I set the and mode, the logic switch is turned on when both SWA and SWD are pushed down. SWA and SWD are pushed down now, so the logic switch is turned on. If any one is pushed up, the logic switch is turned off.
If I select or mode, the logic switch is turned on when SWA or SWD is pushed down.
SWA and SWD are pushed down now, so the logic switch is turned on.
SWA is pushed up, SWD is pushed down, the logic switch is still turned on.
When both of them are pushed up, the logic switch is turned off.
By the way, for the first switch, we can also set ST-THK, throttle joystick.
You can push throttle stick to the position you want. Then long press Push button, there will be a percent value which indicates the current position of the throttle stick.
You can see a Downward arrow here, which means when the throttle travel amount is below ~~ percent, the stick takes effect. Turn the dial to change it to the upward arrow, which means when the throttle travel amount is above ~~ percent, the stick takes effect.
We have set and mode. SWD is pushed down. When throttle stick is above ~~ percent position, the logic switch is turned on. When the throttle stick is below ~~ percent position, the logic switch is turned off. You can see ON/OFF here.
The setting of Logic switch 1 is done. We can assign the logic switch to control a function or a channel.
For example, I use the logic switch 1 to control the timer 1. Enter Timer menu.
I need to set NORM for logic switch here. NORM means the logic switch takes effect. REV or NULL means the logic switch doesn’t take effect.

SWD and throttle stick are combined to control timer 1. SWD is pushed down, in the set position. Push throttle up, when throttle is above ~~ percent position, the timer is turned on. Let’s check it on the main menu. Push throttle up, the timer is on. push it down, when throttle is below ~~ percent position, the timer is turned off.
So that’s all about the logic switch function of AT10II.

Know more details about AT9S Pro via:
https://www.radiolink.com/at9spro

Buy AT9S Pro via:
https://www.radiolink.com/at9spro_whe...

Know more details about AT10II via:
https://www.radiolink.com/at10ii

Buy AT10II via:
https://www.radiolink.com/at10ii_wher...

You can send mails to [email protected] if you have any questions during using our products.

#rcplane #transmitter #radiolink