How to Install Underwater LED Boat Lights Part 1: Where to Mount LED Underwater Lights on Boats

In Part 1 we cover how to pick the best mounting location for LED Underwater Lights on your boat during installation.

During the video, we look at various Liquid Lumens products and where they would work best on this Supra SL550. After reviewing a few different products and mounting locations, we go into detail with selecting the best mounting location for a set of Liquid Lumens Mavericks Underwater Lights.

If you want to skip ahead to one of the key steps in the process, here are the timestamps for the step-by-step:

1:31 - Step 1: Look for a location about 1/3 of the way in from each side of the boat if possible.

1:47 - Step 2: Select a flat surface.

1:51 - Step 3: Be sure lights will not interfere with the boat's equipment.

2:10 - Step 4: Remove any necessary items or panels to gain access to the bilge.

2:27 - Step 5: Inspect the interior area of the boat before you drill.

2:55 - Step 6: Use a reference point to verify where the drill will break into the bilge.

3:50 - Step 7: Cut out drill template and tape to mounting location.

Now you are ready to begin drilling! Continue to How to Install Underwater LED Boat Lights Part 2: How to Drill Through Gel Coat When Wiring LED Lights on a Boat for more help with your installation, or visit https://www.liquidlumens.com/underwat... for more detailed step-by-step instructions.

Comments and questions are always welcome. Let us know in the comment section how we did and what other content you'd like us to see from us in the future. Thanks for watching!