How to Replace Front Brakes 2012-2018 Nissan Altima

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com https://trq.video/ia-1APBS01227

This video shows you how to install new, quality TRQ brake pads and rotors on your 2012-2018 Nissan Altima. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This repair was done on a 2018 Nissan Altima S 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima

Tools you will need:
• Pry Bar https://trq.video/oSr-1AXAA00020
• 10mm Wrench https://trq.video/oUI-1AXAA00010
• 14mm Socket https://trq.video/obqX-1AXAA00015
• 21mm Socket
• 22mm Socket https://trq.video/on3-1AXAA00266
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. https://trq.video/oaH-1AXAA00278
• Brake Caliper Hanger https://trq.video/oik-1AXAA00439
• 1/2 Inch Impact Gun https://trq.video/osg-1AXAA00252
• Ratchet https://trq.video/obx5-1AXAA00016
• Socket Driver
• Socket Extensions https://trq.video/obqX-1AXAA00015
• Torque Wrench https://trq.video/oaBT-1AXAA00044
• Brake Fluid
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves https://trq.video/oZH-1AXSS00048
• Safety Glasses
• Silicone Paste
• Drain Pan
• Floor Jack https://trq.video/o3j-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oR5-1AXAA00065
• Wheel Chocks
• Wire Brush https://trq.video/osr-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Ford 500 1st Generation 2005-2007:    • Ford 500 1st Generation 2005-2007  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.