Wire wrap pendant tutorial.

Hello and welcome to my latest tutorial.

To make this pendant you will need ...
• 0.8mm wire (20g), 3 x 6" (15cm).
• 0.315mm weaving wire (28g) 200cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer).
• Large bead or drilled cabochon, mine is 20mm by 15mm.
• Small beads, 5 x 2mm
• Jump ring, 9mm outside measurement (or whatever size you have handy)

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)

My Etsy shop - https://www.etsy.com/uk/shop/KellyJon...
Facebook -   / kellyjjewellery  
IG - kellyjjewellery

Thanks for watching x

Music is free from youtube;
Invisible Beauty - Aakask Gandhi


©2023 Kelly Jones Jewellery All Rights Reserved

Please do not copy, re-create or share this content in any format!
This content is created by me, for me (Kelly Jones Jewellery) as a means to promote my tutorials.

Thank you!