🚀🚀 Zcon Twin - Build Overview & Maiden - Awesome FPV Wing

🔥 🔥 🔥 🔥 FULL SETUP AND LINKS IN DESCRIPTION BELOW ⬇️ ⬇️ ⬇️ (Click 'SHOW MORE'👈🏻 )
My orange Zcon was showing signs of use and a little abuse over the years, so I decided it was time for a fresh build. It's my favourite plane and I don't want to be without one. When I heard Chris now sells a twin motor version I thought why not, to make it a bit different! Moving with the times I thought it would also be good to go with digital video, as I find myself flying digital way more than analogue these days. I think this is going to be my most flow plane this summer 😎 Hopefully the video covers anything you'd want to know, without going into too much small detail. The maiden footage isn't that exciting as I was getting used to the new setup and not taking much risk, but I can't wait to get calmer weather and push this to it's limit and get super low! If I've missed something out please let me know, I try to read and reply to all comments. Thank you for watching and reading this 🙌🏻

Contents:
0:00 Intro
0:54 Video Contents
1:27 Differences between single & twin ZCon
2:16 Setup Overview
9:25 An error on maiden day
10:49 Maiden flight footage

Zcon Build video ►    • Ritewing ZCon - Setup & Build Overview / P...  

CG on the Zcon twin is approx 22.5cm or 9 inches.

🛫 Launch Settings all default apart from:
set nav_fw_launch_max_angle = 180
set nav_fw_launch_idle_motor_delay = 7000
set nav_fw_launch_motor_delay = 0
set nav_fw_launch_timeout = 10000
set nav_fw_launch_max_altitude = 8000
set nav_fw_launch_climb_angle = 20

☕️ 👋🏻 Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :) ► http://tiny.cc/BuyAdamGaCoffee

🔵 Follow me on my Facebook page for updates, build logs, random pictures & vid clips that don't make it to YouTube:   / adamgdoesfpv  

📷 Follow me on Instagram @adamgdoesfpv ► http://tiny.cc/AdamGonInstagram

Sites I get my awesome FPV goodies from:
✅ Banggood ► http://tiny.cc/BanggoodFPV
✅ RMRC ► http://tiny.cc/RMRC
✅ AtomRC ► http://tiny.cc/Atom-RC (Use coupon 'AdamGdoesFPV' for $10 off)
✅ Amazon ► http://tiny.cc/Amazon-FPV
✅ HobbyKing ► http://tiny.cc/HobbyKing

========ZCon Setup========

In the Air:
-56" Ritewing ZCon Twin ► Only available if you email Chris at Ritewing directly: [email protected]
-DJI O3 Digital transmitter and Camera ► http://tiny.cc/DJI-O3
-Sandisk 256gb V30 Micro SD for onboard 4k60f recording ► http://tiny.cc/Sandisk-256gb-V30
-2 x TrueRC Singularity antennas on the O3 ► http://tiny.cc/Singularity-72mm
-Matek H734 WLITE Flight controller (Running iNav6) ► http://tiny.cc/MatekH743wlite
-2 x Badass 2310 1680kv motor ► http://tiny.cc/Badass-2310-1680
-APC 6x4e and 6x4ep ► http://tiny.cc/APC-6x4
-Hitec HS225MG Servos ► http://tiny.cc/iiww8y
-2 x Little Bee 50a BLHeli32 ESC ► http://tiny.cc/LittleBee50a
-Tiny GPS Rx ► http://tiny.cc/220GPS
-TBS Crossfire Nano Rx ► http://tiny.cc/TBS-Nano-Rx
-Prodrone 868 tuned Dipole antenna ► http://tiny.cc/Tuned-dipole-868
-2 x 4,000mAh 5S in parallel ► http://tiny.cc/5S-lipo
-Red COB LED's ► http://tiny.cc/COB-LEDs

On me:
-DJI V2 Goggles ► http://tiny.cc/DJI-V2-Goggles
-TrueRC Omni Stubbies ► http://tiny.cc/TrueRC-Stubby
-TrueRC X2Air's ► http://tiny.cc/DJI-X2-Air
-Sandisk 64gb V30 Micro SD for goggle DVR ► UK Link: http://tiny.cc/SanDiskV30UK - USA Link: http://tiny.cc/SanDiskV30USA
-TX16s Transmitter ► http://tiny.cc/Radiomaster-TX16s
-Crossfire Micro Tx V2 ► http://tiny.cc/TBS-Crossfire-TX16s


========3D Printed Parts========

Electronics bay tray ► https://www.thingiverse.com/thing:600...
Nose to hold DJO O3 ► https://www.thingiverse.com/thing:600...
Skid ► http://tiny.cc/Skid
Wall mounting hooks designed specifically for this wing (My design) ► http://tiny.cc/ZConWallHook

========3D Printing Equipment========

-3D Printer ► http://tiny.cc/FlSun-Q5
-PLA filament ► http://tiny.cc/EryonePLA
-TPU filament ► http://tiny.cc/SainsmartTPU
-PETG filament ► http://tiny.cc/SainsmartPETG
-Digital Calliper ► http://tiny.cc/DigitalCalliper

========Build equipment========

-E6000 glue ► http://tiny.cc/E6000Glue
-Soldering Iron ► http://tiny.cc/Soldering-Iron
-Laminating Iron ► http://tiny.cc/LaminatingIron
-Laminate ► http://tiny.cc/laminate
-Hot glue gun ► http://tiny.cc/HotGlueGun
-Foam Cutting Tool ► http://tiny.cc/vxgv0y
-Heat Gun ► http://tiny.cc/AdjustableHeatGun2000w
-Watt Meter ► http://tiny.cc/WattMeter
-3M90 spray adhesive ► http://tiny.cc/3M90adhesive