How to Replace Rear Axle Seal 06-18 Jeep Wrangler

Shop for New Auto Parts at 1AAuto.com https://1aau.to/c-384-au

In the video, 1A Auto shows how to replace a worn or leaking axle seal. The video is applicable to the 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18 Jeep Wrangler.

This repair was done on a 2015 Jeep Wrangler Unlimited Sport 3.6L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler

🔧 List of tools used:
• Pry Bar https://1aau.to/ocB-1AXAA00020
• 15mm Wrench
• 18mm Wrench
• 15mm Socket
• 18mm Socket
• 19mm Socket
• 8mm Socket
• 1/2 Inch Breaker Bar
• 3/8 Inch Drive Ratchet
• Ratchet
• Socket Extensions
• Torque Wrench https://1aau.to/ogn-1AXAA00044
• Engine Oil
• RTV
• Chisel
• Drain Pan
• Floor Jack
• Hammer
• Jack Stands
• Razor Blade / Gasket Scraper

Subscribe:    / @1aauto  

Check out our playlist:
Jeep Wrangler 2007-2017 3rd Gen (JK):    • Jeep Wrangler 2007-2017 3rd Gen (JK)  

For More Info visit us at https://1aau.to/h-vv

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.