How to Replace Front Strut & Spring Assemblies 2011-2020 Toyota Sienna

Buy Now!
New Strut & Spring Assembly Set from 1AAuto.com https://trq.video/ia-1ASSP01471
New Strut & Spring Assembly from 1AAuto.com https://trq.video/ia-1ASTS01406
New Strut & Spring Assembly from 1AAuto.com https://trq.video/ia-1ASTS01407

This video shows you how to install new front strut & spring assemblies from TRQ on your 2011-2020 Toyota Sienna. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.

Estimated installation time for a professional technician is approximately: 5 hours 0 minutes

This repair was done on a 2011 Toyota Sienna Limited 3.5L Mini Passenger Van 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Toyota Sienna
2012 Toyota Sienna
2013 Toyota Sienna
2014 Toyota Sienna
2015 Toyota Sienna
2016 Toyota Sienna
2017 Toyota Sienna
2018 Toyota Sienna
2019 Toyota Sienna
2020 Toyota Sienna

Tools you will need:
• Pocket Screwdriver
• Pry Bar https://trq.video/oadZ-1AXAA00020
• 22mm Wrench
• 10mm Socket
• 12mm Socket
• 14mm Socket
• 17mm Socket
• 21mm Socket
• 22mm Socket
• 30mm 12-Point Socket https://trq.video/oaD-1AAST00002
• Trim Tool Set https://trq.video/oaFs-1AXXX00006
• Locking Pliers
• Needle Nose Locking Pliers
• Ratchet
• Socket Extensions
• Swivel
• Torque Wrench https://trq.video/obpk-1AXAA00044
• Gloves https://trq.video/obuS-1AXSS00048
• Painter's Tape
• Safety Glasses
• Floor Jack
• Hammer
• Jack Stands
• Punch
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Toyota Sienna 2011-2020 3rd Generation:    • Toyota Sienna 2011-2020 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.