Instructions For Making A Good Impression For Your Removable Veneers

Shiny Smile Veneers are made from an impression you do in the comfort of your own home, no need for a costly visit to your dentist. This video explains the process of how to get a detailed impression from start to finish. This is the first step on the road to getting the smile you've always wanted using clip on dental veneers. Visit our FAQ Library at https://www.shinysmileveneers.com/faqs/ for any questions you may have about Shiny Smile Veneers.

(Music plays with Shiny Smile Veneers Logo Appearing) Your custom Shiny Smiles Veneers will be made from your home impression, a good impression results in a great fitting veneer. Follow these instructions carefully to achieve a good dental impression. Take the time and attention necessary to complete the process properly for the best result. Most people get it right the first time, but it’s critical to follow instructions carefully. Using a mirror and stop watch can make this procedure easier. Before you begin, make sure you have the correct size impression tray for both upper and if necessary, lower teeth. The tray should fit easily inside your mouth and your teeth should not be hitting the sides of either tray. The impression material should be at room temperature for at least 12 to 24 hours prior to making your impression. This will help make the process of combing the two parts into one impression material much easier. Lay out all your supplies and make sure you can complete the process without interruption. Step 1: Brush your teeth thoroughly and rinse out your mouth. Step 2: Find the impression tray the fits over all your teeth. Step 3: Remove the impression material components from containers labeled 1 and 2. Combine them using your clean hands to knead and fold the two components together until fully blended, no more than 30 seconds. Material should be a putty like consistency and one solid color. Do this quickly as the combined material will begin to harden within 45 seconds. Step 4: Roll the material in your hands until it is roughly the size of your finger. Press the material into the impression try making sure to fill the tray completely. Step 5: Fully insert the impression try into your dry mouth without touching any teeth. Center the tray on all teeth and gently push the impression try against your teeth using your thumbs, applying even pressure to both sides. Avoid rocking or wiggling the tray. Step 6: Using your fingers, press gently with one continuous motion for 5 to 10 seconds. Don’t bite down, and down try to talk while the impression tray is in your mouth. Step 7: Using your thumbs, hold the impression in place for 3 minutes without moving. Do not remove the tray before 3 minutes have elapsed, as this could cause the material to shrink or shift if it is not fully set, creating an impression that doesn’t include your gum line. Step 8: before gently removing the impression tray, ensure the impression has set by checking the texture using both your tongue and fingertips. With one smooth, straight downward motion, gently remove the tray from your teeth. Don’t rock, wiggle or angle the tray when removing it from your mouth, as this can compromise the integrity of your impression. Step 9: Repeat the entire process if doing an impression of your lower teeth. Using your index fingers, rather than your thumbs, to press and hold the tray in place for 3 minutes. Do not bite down or talk during this tile. Step 10: Do not remove the putting from the impression tray. After checking that your impression gives a clear picture of your teeth and gum line, without any tears, breaks or drag marks, allow your impressions to dry completely before inserting them into the return package provided with your purchase. Fill out the information card included and mail your impressions to Shiny Smile Veneers. That’s all there is to it! The Home Impression Process is simple, but it will require your complete attention and best effort.