DIY RC Plane.How To Build RC Trainer Plane With Balsa Wood Part 2.How To Make Trainer Rc Plane Part2

DIY RC Plane.How To Build RC Trainer Plane With Balsa Wood Part 2.How To Make Trainer Rc Plane Part 2.
Are you ready to take your balsa wood RC Trainer to the next level? In this exciting second part of our DIY RC Trainer Airplane series, In this video, we'll guide you through the entire process of building a balsa wood trainer plane from scratch. From selecting the right materials to covering the wings with monokote, we'll cover everything you need to know to create a sturdy and reliable aircraft. Whether you're a complete beginner or have some experience with RC flying, this tutorial is perfect for you. So grab your tools and let's get started!we'll show you how to achieve a professional finish with Monokote. Join us as we cover every step of the process, from preparing the surface to applying the heat shrink film. Don't forget to subscribe to DIY RC for more in-depth tutorials and RC building projects.

✅ Materials:
Balsa wood: Various thicknesses (1mm, 1.5mm, 2mm, 3mm) for different parts of the plane.
Foam core: For the wing.
Monokote: Covering film for the wing.
Wood glue: For joining balsa wood pieces.
Epoxy: For stronger joints, especially for the motor mount.
Sandpaper: For smoothing surfaces.

✅ Hardware:
Control rods: To connect servos to control surfaces.
Control horns: To attach control rods to control surfaces.
Hinges: For control surfaces.
Screws: For attaching various components.
Motor mount: To secure the motor to the airframe.

✅ Power System:
Brushless motor: 2815 1500kv
Electronic speed controller (ESC): Compatible with the motor and battery.
LiPo battery: 3-4S
Battery charger: Compatible with LiPo batteries.
Propeller: 9-inch

✅ Radio Equipment:
Transmitter: 4-6 channel
Receiver: Compatible with the transmitter.
Servos: 4-5 servos for ailerons, elevator, rudder, and throttle.

✅ Tools:
X-acto knife: For precise cutting.
Scissors: For general cutting.
Iron: For applying monokote.
Measuring tape: For accurate measurements.
Building plans: A detailed blueprint of the plane.

✅ Here's a more concise version of the step-by-step guide:

✅ Build Your Own RC Plane
Materials: Balsa wood, foam core, Monokote, glue, epoxy, control rods, control horns, hinges, screws, motor, ESC, battery, charger, propeller, X-Acto knife, scissors, iron, sandpaper.


✅ General Steps for Installing Components on Your RC Plane
1. Prepare the Airframe:
Ensure that all the wooden parts are glued securely and sanded smooth.
Drill any necessary holes for control rods, wires, and screws.
2. Install the Motor and Motor Mount:
Secure the motor mount to the fuselage using screws.
Mount the motor onto the motor mount.
Connect the motor wires to the Electronic Speed Controller (ESC).
3. Install the ESC:
Secure the ESC to the fuselage using double-sided tape or Velcro.
Connect the battery connector to the ESC.
Route the motor wires and servo wires neatly inside the fuselage.
4. Install the Servos:
Glue the servo horns to the control surfaces (ailerons, elevator, rudder).
Secure the servos to the fuselage using screws.
Connect the servo wires to the receiver.
5. Install the Receiver:
Secure the receiver inside the fuselage using double-sided tape or Velcro.
Connect the receiver to the ESC and servos.
6. Install the Battery:
Secure the battery tray to the fuselage.
Connect the battery to the ESC using a balance connector.
7. Connect Control Rods:
Connect the control rods to the servo horns and control surfaces.
Adjust the control rod lengths to ensure proper control surface movement.
8. Install Landing Gear:
Attach the landing gear to the fuselage using screws or epoxy.
9. Check Control Throws:
Ensure that all control surfaces move the correct amount and in the correct direction.
10. Balance the Plane:
Balance the plane by adjusting the battery position or adding weight as needed.

🚀วิดีโอคลิปนี้ผลิตและสร้างสรรค์โดย: วัช บังเอิญ (ศุภากร แก้วสะแสน)
📞 ช่องทางการติดต่อ/ติดต่องาน "วัช บังเอิญ เครื่องบินบังคับ" 🚀
สำหรับผู้ที่สนใจงาน DIY เครื่องบินบังคับ หรือต้องการติดต่องาน/สปอนเซอร์ สามารถติดต่อ ผม ศุภากร แก้วสะแสน หรือ วัช บังเอิญ ได้ตามรายละเอียดด้านล่างนี้ครับ:

✅Line ID : 0824424683
✅Facebook ส่วนตัว : วัช บังเอิญ เครื่องบินบังคับ
ลิงก์ Facebook :   / diyrcplane  
✅ YouTube Channel: ❤️ (แหล่งรวมวิดีโอสอนทำเครื่องบินบังคับแบบเต็มรูปแบบ)
ลิงก์:    / @diyrcplane  
✅TikTok: 🎵 (ชมคลิปสั้นสนุกๆ และการทดสอบบิน)
ลิงก์:   / doozix  
✅Gmail : 📧 [email protected]
✅ชื่อจริง : นาย ศุภากร แก้วสะแสน
✅ชื่อเล่น : วัช บังเอิญ
✅เบอร์โทรศัพท์ : 📱 062-680-9146

👉 ฝากกดติดตามทุกช่องทางเพื่อเป็นกำลังใจให้ด้วยนะครับ! ขอบคุณครับ!

#rc #diyrcplane #hobby #flitetest #rcplane #howto #aviation #restoration #เครื่องบินบังคับ #เครื่องบิน #easy #howtobuild