How to Replace Rear Brakes 2003-2011 Mercury Grand Marquis

Buy Now!
New Brake Pads from 1AAuto.com http://1aau.to/ia/1ABPS03681
New Brake Rotor Set from 1AAuto.com https://trq.video/ia-1APBR01080
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1APBS09001

This video shows you how to install new, quality TRQ brake pads and rotors on your 2003-2011 Mercury Grand Marquis. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This repair was done on a 2009 Mercury Grand Marquis LS 4.6L Sedan 4-Door RWD Automatic and the process should be similar on the following vehicles:
2003 Mercury Grand Marquis
2004 Mercury Grand Marquis
2005 Mercury Grand Marquis
2006 Mercury Grand Marquis
2007 Mercury Grand Marquis
2008 Mercury Grand Marquis
2009 Mercury Grand Marquis
2010 Mercury Grand Marquis
2011 Mercury Grand Marquis

Tools you will need:
• Pry Bar https://trq.video/oKq-1AXAA00020
• 10mm Wrench
• 21mm Socket
• Angled Die Grinder
• Brake Caliper Compressor Tool. Single Piston. Lever Style.
• Ratchet
• Socket Extensions
• Torque Wrench https://trq.video/oapH-1AXAA00044
• Brake Parts Cleaner
• Copper Anti-Seize
• Drain Pan
• Hammer
• Pick https://trq.video/oFC-1AXAA00037
• Wire Brush https://trq.video/oqx-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Mercury Grand Marquis 5th Generation 2003-2011:    • Mercury Grand Marquis 5th Generation 2003-...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.