How to Replace Fuel Transfer Unit 2006-2012 Ford Fusion

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-65-bw

This video shows you how to install a new fuel transfer unit from TRQ on your 2006-2012 Ford Fusion.

This repair was done on a 2007 Ford Fusion SEL 3.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion

Tools you will need:
• 8mm Wrench https://trq.video/oi3-1AXAA00011
• 7mm Socket https://trq.video/obyF-1AXAA00017
• Pliers
• Ratchet https://trq.video/obYx-1AXAA00016
• Socket Extensions https://trq.video/obVq-1AXAA00015
• Gloves https://trq.video/oaMR-1AXSS00048
• Safety Glasses
• Sandpaper
• Drain Pan
• Wire Brush https://trq.video/owH-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Ford Fusion 2006-2012 1st Generation:    • Ford Fusion 2006-2012 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.