How to Replace EGR Valve 2001-2005 Honda Civic

Buy Now!
New EGR Valve from 1AAuto.com https://trq.video/ib-1AEGR00251

The EGR valve helps to reduce pollution by directing some exhaust gas back through the combustion chambers. If the valve is stuck the system won't work correctly, and if it leaks the engine might stall or not start at all. This video shows you how to install a new EGR valve on your 2001-2005 Honda Civic.

This repair was done on a 2001 Honda Civic EX 1.7L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2001 Honda Civic
2002 Honda Civic
2003 Honda Civic
2004 Honda Civic
2005 Honda Civic

Tools you will need:
• 12mm Socket https://trq.video/okr-1AXAA00015
• 14mm Deep Socket
• 1/4 Inch Ratchet https://trq.video/oiG-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/okr-1AXAA00015
• Socket Extensions https://trq.video/okr-1AXAA00015
• Gloves https://trq.video/oa2-1AXSS00048
• Safety Glasses
• 10mm Hex Socket
• Magnet - Extendable

Subscribe:    / @trq  

Check out our playlist:
Honda Civic 2001-2005 7th Generation:    • Honda Civic 2001-2005 7th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.