Tiny System, Huge POWER - FMS 1/24 FX24 Dodge + 100A SEQURE ANT Combo in MUD | RC ADVENTURES

BRUH - 100 AMP PEAK ESC!! Back in the mud with a classic rig—the FMS 1/24 FX24 Dodge Power Wagon. This time it’s running a brand-new setup: the SEQURE ANT ESC paired with a 1520 3500KV Brushless Outrunner motor, powered by a 3S 450mAh LiPo. The motor combo costs about $54 USD / $89 CAD (http://bit.ly/4lUVUGg), and the performance it delivers is outstanding for the price.

The video opens with the upgraded Power Wagon tearing through mud and splashing across 2–3 inches of water. Compared to stock, the brushless system gives around 30–40% more wheel speed and a noticeable torque increase, letting the truck claw through slick climbs and muscle out of deep ruts.

After the action, I break down the details:

The motor and ESC installed in the FX24.

A second set shown beside the truck for scale.

How the built-in WiFi programming makes tuning simple from your phone.

Fitment notes: the FX24 needed minor transmission modification, but this combo should slide into an Axial SCX24 with far less work—which is my next goal for my son’s rig.

Upgrade Specs:

Motor: 1520 Brushless Outrunner, 3500KV

ESC: SEQURE ANT ESC, WiFi programmable, 50A continuous / 100A burst

BEC: 6V / 3A built-in

Input: 2S–3S LiPo (7–13V)

ESC Size/Weight: 32×15×11 mm, ~16.5 g

Motor Size/Weight: 15.8×20.7 mm, ~16.8 g

Combo Price: ~$50 USD / $89 CAD

This is a small system with a big punch, proving that 1/24 scale trucks can pack serious brushless power. It’s not a drop-in for every micro crawler, but if you’re willing to do a little work, the performance gains make it worthwhile.

Model

ANT ESC

Input voltage

DC 7V-13V（2-3S Lipo）

Continuous current (good heat dissipation)

50A

Maximum current (good heat dissipation)

100A

Firmware

ESCape32

Signal protocol

Dshot (all), PWM, Oneshot, Multishot, etc.

RGB LED color light

BEC

6V / 3A (continuous current)

Electronic switch - Single press to start up, long press to shut down

Wire specifications

Power cable (105mm), motor cable (70mm), signal cable (130mm)

Product size

32*15*11mm (excluding wire)

Product weight

16.5g (including wire)

Application scenarios

1/12, 1/16, 1/18, 1/24 models

If you’ve been thinking about upgrading your 1/24 rig, this might be the upgrade that changes everything.

#RCSparks #FMSFX24 #ANT #SEQURE #BrushlessRC #SCX24Upgrade #RCMudTruck #ScaleRC #CrawlerLife