How to Replace Front Lower Ball Joint 1994-2004 Chevy S-10

Buy Now!
New Ball Joint from 1AAuto.com https://trq.video/ic-1ASBJ00005
New Ball Joint Set from 1AAuto.com https://trq.video/ia-1ASFK00683

Modern suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new, quality TRQ ball joints on your 1994-2004 Chevy S-10.

• Check here for more videos on the 1994-2004 Chevy S-10    • Chevy S-10 2nd Generation 1994-2004  

This repair was done on a 2000 Chevrolet S10 ZR2 4.3L Extended Cab Pickup 2-Door 4WD and the process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oma-1AXAA00013
• Pry Bar https://trq.video/ocS-1AXAA00020
• 36mm Socket https://trq.video/oq-1AAST00006
• Brake Caliper Hanger https://trq.video/o3-1AXAA00439
• Straight Cutters
• 1/2 Inch Impact Gun https://trq.video/oaA-1AXAA00252
• Ratchet https://trq.video/omT-1AXAA00016
• Socket Driver
• Torque Wrench https://trq.video/ogR-1AXAA00044
• Liquid Thread Locker
• Rust Penetrant
• Center Punch https://trq.video/oah-1AXAA00055
• Floor Jack https://trq.video/odm-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oc6-1AXAA00065
• Rubber Mallet
• Wheel Chocks
• Wire Brush https://trq.video/oaQ-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Chevy S-10 2nd Generation 1994-2004:    • Chevy S-10 2nd Generation 1994-2004  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.