How to Replace Front Inner Tie Rod 2011-2017 Honda Odyssey

Buy Now!
New Tie Rod Set from 1AAuto.com https://trq.video/ia-1ASFK06104
New Tie Rod from 1AAuto.com https://trq.video/ia-1ASTE00931

This video shows you how to replace the inner tie rods on your 2011-2017 Honda Odyssey. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.

This repair was done on a 2011 Honda Odyssey and the process should be similar on the following vehicles:
2011 Honda Odyssey
2012 Honda Odyssey
2013 Honda Odyssey
2014 Honda Odyssey
2015 Honda Odyssey
2016 Honda Odyssey
2017 Honda Odyssey

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oa2W-1AXAA00013
• Pocket Screwdriver
• 22mm Wrench
• 24mm Wrench
• 17mm Socket https://trq.video/oa3s-1AXAA00015
• 21mm Socket
• 22mm Socket https://trq.video/omg-1AXAA00266
• 24mm Socket
• Inner Tie Rod Removal Tool https://trq.video/or-1AXAA00438
• Locking Pliers https://trq.video/oiA-1AXAA00139
• Metal Cutters
• Needle nose pliers https://trq.video/oxS-1AXAA00051
• Needle nose pliers https://trq.video/oxS-1AXAA00052
• 1/2 Inch Ratchet
• Torque Wrench https://trq.video/oame-1AXAA00044
• Anti-Seize Grease
• Bearing Grease
• Brake Grease
• Copper Anti-Seize
• Rust Penetrant
• Wire Ties
• Brass Punch
• Floor Jack https://trq.video/oP5-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oLj-1AXAA00065
• Punch

Subscribe:    / @trq  

Check out our playlist:
Honda Odyssey 2011-2017 4th Gen:    • Honda Odyssey 2011-2017 4th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.