Set Up the Hitron CODA-4582 Wireless Modem from Midco

Use the Hitron CODA-4582 wireless modem to connect your devices to Midco internet service. If you need additional instructions for setting up any equipment from Midco, visit Midco.com/Support and look for the self-install section.

Steps For: Set Up the Hitron CODA-4582 Wireless Modem from Midco

Required to Start:
Modem
Power cord
Coax cable
Ethernet cable (Optional and needed only if you’re doing a non-wireless connection)
Computer or device to connect to the internet.

Steps

Plug in Your Modem
1. Then find the best location for your modem. Off the floor, away from other wireless devices and near an active cable outlet is best.
2. Connect the coax cable from the wall outlet to the connection on your modem.
3. Plug your modem into a power outlet.
4. Make sure all connections are finger tight.

Wait for the Light
1. Wait up to 15 minutes for the Online light to appear steady green.
2. Online light isn’t working or still flashing after 15 minutes? Here are a couple of quick things to check.
i. Make sure you’re using the coax cable shipped with your equipment.
ii. Make sure the connections are finger tight.
iii. Confirm that the green power light on the modem is on.
iv. If it’s not, try a different power outlet.

Set Up Your Wi-Fi Network
1. On the back of your modem, look for these settings on your equipment
v. Default Wi-Fi network (This is your network name)
vi. Default key (This is your password)
2. You can also scan the QR code on the back of the modem using the camera on your phone to get your default network details.

Connect Your Devices
1. With your device (like a smartphone or laptop), connect to the default network using your device’s Wi-Fi settings. This will launch the Easy Connect to guide you through setting up your personal Wi-Fi network.
2. Once inside Easy Connect, choose LET’S Go, and follow the onscreen steps.
3. Enter your new Wi-Fi network name and password.
4. Choose Confirm Setup.
5. Review the details on the next screen and edit if needed.
6. Choose Complete My Setup. Important: When you save your new Wi-Fi network details, the modem will automatically disconnect from the default network.
7. Go to your device’s Wi-Fi settings. Follow the steps to connect to Wi-Fi. Open a website such as Midco.com to make sure it loads. Then, get more devices on Wi-Fi.

Troubleshooting: What are the lights on the front of your modem showing?
Down arrow is blinking, and up arrow isn’t lit:
b. Try a different cable outlet.
c. Wait 10 minutes to see if it connects. If the lights turn solid blue, go to the Set Up Your Wi-Fi steps above.

Both the arrow lights are blinking in unison:
a. Wait for your modem to update.
b. If you’re still having issues, perform a factory reset (see steps in video starting at 5:25).

If none of these steps work, contact our support team at Midco.com/Contact.