How to install the Philips Hue wall switch module

Philips Hue wall switch module makes your existing switches smart and gives you control over your lights with any standard switch. In just a few minutes, install the Hue wall switch module and never worry about "unreachable" lights again. This step-by-step guide will help you install the module to control your smart lighting system seamlessly.

💡 Installation Steps:

1.Turn off the circuit breaker.
2.Remove the light switch plate from the wall.
3.Disconnect the wires from the existing switch.
4.Connect the wires to the Hue wall switch module.
5.Secure the module inside the electrical box.
6.Reassemble the switch plate.
7.Power on and set up the module in the Hue app.

00:06 Power off circuit breaker before installation
00:08 Remove the light switch plate from the wall
00:26 Remove the switch
00:28 Disconnect the wires from the switch
00:32 Insert the wires from the wall into the wire connector
00:45 Connect the double end of the wire to port 1 the wall switch module
00:53 Connect the white wire to the top of the wall switch
00:55 ...and the yellow wire to the bottom of the wall switch
01:00 Place the wall switch into the electrical box
01:06 ...and reassemble the switch plate

🔗 Featured Product: Philips Hue Wall Switch Module - www.philips-hue.com/wallswitchmodule

Follow Us on Social Media:

Facebook:   / huephilips  
Instagram:   / philipshue  
X (formerly Twitter):   / tweethue  
TikTok:   / philipshue  

#PhilipsHue #SmartWallSwitch #SmartLights #HomeAutomation #HueIntegration #WirelessSwitch #SmartHomeLighting #HueAppControl #LightSwitchModule #PhilipsHueSwitch