How to Replace Rear Brakes 2011-2019 Ford Explorer

Buy Now!
New Brake Rotor Set from 1AAuto.com http://1aau.to/ia/1ABFS04272
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1ABFS04319
New Brake Pads from 1AAuto.com http://1aau.to/id/1ABPS02833

This video shows you how to install new rear brake pads and rotors from TRQ on your 2011-2019 Ford Explorer. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This repair was done on a 2013 Ford Explorer Limited 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer

Tools you will need:
• Phillips Head Screwdriver
• Pry Bar http://1aau.to/o6Y/1AXAA00020
• 10mm Socket
• 13mm Socket
• 15mm Socket
• 19mm Socket
• Brake Caliper Compressor Tool. Single Piston. Screw Style.
• Brake Caliper Hanger http://1aau.to/omQ/1AXAA00439
• Ratchet
• Socket Driver
• Torque Wrench http://1aau.to/oa6Z/1AXAA00044
• Brake Fluid
• Brake Parts Cleaner
• Gloves http://1aau.to/oaU8/1AXSS00048
• Liquid Thread Locker
• Safety Glasses
• Silicone Brake Parts Lubricant
• Silicone Paste
• Floor Jack
• Jack Stands
• Wheel Chocks
• Wire Brush http://1aau.to/oxh/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Ford Explorer 2011-2019 5th Generation:    • Ford Explorer 2011-2019 5th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.