EP. 13 My BMW E30 Restoration - Fabricating E36 Twin Ear Diff Cover Bush Mounts
Автор: Bad E30
Загружено: 2023-08-13
Просмотров: 6835
Hi and welcome to my channel, in this episode I’ll be showing how I custom made a mounting solution for my e36 twin ear diff cover to go onto my e30 touring.
E30’s usually only have the single mount on the diff and these are known to have issues in high power applications. However, the main reason why I converted mine to the e36 cover was cost and availability.
I had to already replace the complete crossmember due to rust so thought it best to upgrade the current setup. I used a measurement from a friend to get the correct height of the diff bushes and made the mounts to suit.
I used 50x25x2mm box section, and a custom made spacer to sit correctly against the internal part of the bush.
Time codes:
0:00 - Intro
0:12 - Installing crossmember and ARB mounts
1:06 - Fitting subframe and diff for mock up
1:47 - Fabricating the diff mounts
4:55 - Welding in the mounts
7:03 - Final test fit
7:28 - Painting
7:58 - Outro
Products used:
DINITROL Converust RC 800: https://www.ebay.co.uk/itm/233363463170
MIPA EP-Grundierfiller EPOXY PRIMER 2k: https://www.ebay.co.uk/itm/174306755267
U-Pol Weld 2 Primer: https://www.ebay.co.uk/itm/173696031285
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
