Garmin Venu 2s Full Teardown Tutorial

Send your device in for expert repair:
👉 https://www.joesge.com/pages/repair-s...

Prefer to DIY?
🛒 Buy the Garmin Venu 2s Parts here:
👉️ https://www.joesge.com/products/garmi...
🧰 Get the repair tools shown in this video:
Heat Gun:
👉️ https://www.joesge.com/products/hot-a...
Thin Pry Tool:
👉️ https://www.joesge.com/products/apple...
Isopropyl Alcohol:
👉️ https://www.joesge.com/products/clean...
Flathead Screwdriver:
👉️ https://www.joesge.com/products/flat-...
Nylon Spudger:
👉️ https://www.joesge.com/products/nylon...
Phillips 1.5mm Screwdriver:
👉️ https://www.joesge.com/products/elect...
Soldering Iron:
👉️ https://www.joesge.com/products/60w-a...


🔧 Steps to Fix Your Device
1. Use a heat gun set to 170°C and apply heat around the sides of the watch to loosen the adhesive.
2. Once heated, use a spudger to gently pry the screen up from the housing.
3. Carefully disconnect the screen ribbon using a spudger.
4. Unscrew the four screws holding the motherboard in place.
5. Use a nylon spudger to disconnect any additional ribbons connected to the motherboard.
6. Gently pry up the motherboard.
7. Apply a little alcohol and use a plastic spudger to pry the battery out of its compartment.
8. Using your soldering iron unsolder the connections from the battery.
9. Keep track of all screws and components for reassembly.


🥷 Calling All Repair Ninjas!
We’ve created a channel membership to meet the demand for more custom repair content. Members can:

Request 1 custom repair video/month

Get priority upload placement

Add an optional shout-out at the start of the video!

🎥 Join the Repair Dojo here: https://bit.ly/3rMJJkW

🤝 Follow Us for More Repair Wisdom
📸 Instagram:   / joesge  
📘 Facebook:   / joesge  

💬 Questions? Hit Us Up
🌐 Website: www.JoesGE.com
📩 Email: Support@JoesGE.com
📱 Call/Text: 360-362-1722