How to Replace Blower Motor Resistor 2004-2006 Scion xB

Buy Now!
New Blower Motor Resistor from 1AAuto.com https://trq.video/ia-1AHBR00062

This video shows you how to install a blower motor resistor on your 2004-2006 Scion xB. The heat and air condition fan is controlled by a separate module, called the blower motor resistor. The nature of this component’s job causes it to heat up frequently, which can lead to failure. If your vents will only blow one speed, this is likely the cause. TRQ has a new resistor module made specifically for your vehicle.

This repair was done on a 2005 Scion xB Base 1.5L Wagon 4-Door FWD Automatic and the process should be similar on the following vehicles:
2004 Scion xB
2005 Scion xB
2006 Scion xB

Tools you will need:
• Phillips Head Screwdriver https://trq.video/opI-1AXAA00013
• Pocket Screwdriver
• 10mm Socket https://trq.video/onc-1AXAA00017
• Trim Tool Set https://trq.video/oeN-1AXXX00006
• Ratchet https://trq.video/oqX-1AXAA00016
• Socket Extensions https://trq.video/opG-1AXAA00015

Subscribe:    / @trq  

Check out our playlist:
Scion xB 2004-2006 1st Generation:    • Scion xB 2004-2006 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.