Today, I service a Ski Doo secondary clutch on a REV GTX.

Dino’s Tinker Shed, S2 Ep53, Today, I service a Ski Doo secondary clutch on a REV GTX.
In this episode, I show you how to remove, clean and inspect a driven clutch in a 2005 REV GTX with a 500ss motor. Proper cleaning and set up for any snowmobile clutch and will result in better engagement and shifting quality.
This is not a difficult task and many other snow machines use very similar clutches with slight variations on how the unit is put together and held on the jack shaft. Before you begin I always recommend acquiring and reading the manual that is associated with your particular make model and year of your sled, even the same make and model may have variations of clutches between different years so make sure you know what you have before you start this job.
You will need a few specialized tools, a clutch press being the most notable however some other brands of clutches may also require tools I do not mention in the video such as snap ring plyers so make sure to check your manual.
Support the channel by purchasing merchandise
DinosTinkerShed - Etsy Canada

I have included time code chapters below to help you skip through the video if you like.
TIME CODE CHAPTERS:
00:00- Cold opening
01:23- Introduction
01:43-I am not a mechanic
02:28-Overview of the driven clutch
05:30- Removing the driven clutch
08:33- Inspecting the jack shaft and spacers
10:09- Components of the clutch
14:06- Special tools
15:27- Disassembly and inspection
25:21- How the adjustment mechanism works
27:24- Re-assembly
28:35- Re-installation
31:36- Summary
MUSIC:
Country Cue 1 by Audionautix is licensed under a Creative Commons Attribution 4.0 licence. https://creativecommons.org/licenses/...

Artist: http://audionautix.com/
All Good In The Wood by Audionautix is licensed under a Creative Commons Attribution 4.0 licence. https://creativecommons.org/licenses/...

Artist: http://audionautix.com/