Ep.02 | I carry on building the cabin, laying down the 2nd layer of logs | 3-July-2022

Again, apologies for the build quality, I'm still learning the entire process. Also, sorry for not showing the cutting of the lateral groove, for some reason that video was lost. But there's plenty of time to record that part again.

0:20 3D plan
2:02 Cutting the bottom notches (upside down)
6:25 Marking the lateral groove edges
7:15 Drilling for the dowels (Ø32, then Ø40)
8:58 Sanding with grit 60 flap disc
10:31 Tucking and stapling earthwool into the lateral groove
13:29 Doweling
14:35 Sanding the top of the logs
15:45 Cutting off excess dowel ends
16:01 Lifting the 2 side logs in place (Layer 2)

List of the tools that I'm using in the video:
Coloured chalks (from Wilkinson's)
Mapsyst hewing axe (ebay: MAPSYST Bulgaria)
Gränsfors broad axe (Sweden)
JORAN Auger drill Ø32mm x 480mm (made in Japan)
FISCHER Auger drill Ø40mm x 320mm
VERITAS Log scribe (Made in Canada)
Bosch PWS 700-115 115mm Corded Angle Grinder with 60grit flap discs (made in Hungary)
Rapid PRO hammer tacker (Made in Sweden)
Titan SDS plus drill (https://www.screwfix.com/p/titan-ttb6...)
Panzer timber tongs - Model 20475 (https://www.chrisforestry.co.uk/store...) (Made in Italy)
Windy Smithy log dogs (https://www.windysmithy.co.uk/hand-tools) (Made in UK)
VidaXL pickaroon (EAN:8718475887645; SKU:141268) Extended by me (https://www.vidaxl.co.uk/e/tree-lifte...)
Einhell chainsaw GC-PC1335 TC (I might swap to my Makita in the next video, which is 1 kg lighter and also, easier to start). The Einhell works reliably though
Warrior 240v 500KG Scaffold Hoist modified by me https://www.warriorwinches.co.uk/prod...
IMPAX 1800W Inverter frame generator IM1800IFG
Scarf board (18"x3" / 450x75mm) laser cut by me from a piece of 3mm MDF

Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/soundroll/tropicana
License code: PV6D9OLE5EAG1UPY