Date, Time & Temperature Display

This video is Episode 6 of the Xiao Starter Kit Experiments. In this video we try out the Temperature and Humidity Sensor as well as the Real Time Clock, and WiFI to access the Internet to get the correct Time and Date. The results are displayed on the OLED display. In the second part of the video we use similar code with an ESP32-WROOM-32U board, using the ESP32 build in clock and display the results on a 3.2" TFT Display. Finally, we show how to port the code from PlatformIO to the Arduino IDE. Devices and products used:Xiao Starter Kit: https://www.seeedstudio.com/Seeed-XIA... Studio XIAO Boards: https://www.seeedstudio.com/xiao-seri... ESP-WROOM-32: https://www.aliexpress.us/item/325680... inch 320*240 SPI Serial TFT LCD Module: https://www.aliexpress.us/item/325680... for these episodes will be on the download page of my web site: https://www.paay.usEpisodes:1: Introduction to the XIAO Starter Kit and its sensor modules.    • Seeed XIAO Starter Kit Introduction  2: Using a Light Sensor, Motion Detector, LED Panel to create a motion sensitive LED light.    • Ep.2: Creating a Motion Controlled LED light.  3: Creating a Digital Clock using Wi-Fi, an NTP server, RTC Chip and an OLED Display.    • Ep.2: Creating a Motion Controlled LED light.  4: Driving the Analog Servo with a Rotary Potentiometer module to adjust the servo from 0 to 180 degrees motion.    • Ep. 4: How to control an Analog Servo Module  5: Using the IR Sensor/Decoder, Potentiometer, IR Remote and Neo-Pixel LED Strip to select different colors and brightness levels etc.    • Ep5. Driving a Neo-Pixel strip incorporati...  6: This Video: Using the Humidity/Temperature Sensor, Real Time Clock and Wi-Fi for the NTP server to display Date, Time Temperature and Humidity on the OLED display.Upcoming Episodes:7: Using RFID sensors to read Credit Cards, Cell Phone and other RFID devices.8: Using the 3D Motion Detector to sense motion and respond to it.9: More TBAChapters:0:00 Intro using XIAO Esp32C3, Time, Temp., Humidity1:57 Demo2:39 Code Review using PlatformIO12:26 Intro using ESP32-WROOM-32U board13:33 LcdWiki - 3.2" IPS SPI Module info17:27 TFT-eSPI Library Setup27:33 Demo using TFT Display28:26 Porting to the Arduino IDE