How to Replace Oil Filter Housing 2011-2015 Chevrolet Cruze

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-231-N

This video shows you how to install a new oil cooler and filter housing assembly in your 2011-2015 Chevy Cruze.
If the oil cooler and filter assembly has begun to leak, is clogged, or is otherwise problematic, you may find your vehicle losing oil or coolant, which could lead to engine failure.

This repair was done on a 2013 Chevrolet Cruze LT 1.4L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze

Tools you will need:
• Flat Blade Screwdriver
• Pocket Screwdriver
• 10mm Socket
• 12mm Socket
• 13mm Socket
• 17mm Socket
• 24mm Socket
• 7mm Socket
• Hose Clamp Pliers https://trq.video/oN-1AXAA00076
• Needle nose pliers
• Needle nose pliers
• E10 Socket
• E12 Inverted Torx Socket
• T45 Socket
• Ratchet
• Socket Extensions
• Torque Wrench https://trq.video/ojs-1AXAA00044
• Cloth Rags
• Engine Oil
• Bucket
• Drain Pan
• Pick https://trq.video/oc6-1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
Chevy Cruze 2011-2015 1st Gen:    • Chevy Cruze 2011-2015 1st Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.