Replacing the front hubs on my Motorhome

I show how I removed the old front hubs, and replaced them with new bearings installed. I also tested the brake rotors for runout. This is in my 2000 Workhorse P32 based Class A motorhome originally sold by Georgie Boy. Please see below for links to my other motorhome restoration videos.

An overview of the renovation of my Georgie Boy Pursuit Motorhome on a Workhorse P32 Workhorse chassis can be found at:    • Intro to 2000 Workhorse motorhome renovation  &t=0
Front Hubs back on:    • Replacing the front hubs on my Motorhome  
Front brake hoses part 3: installing the new brake tubes and flexible hoses:    • Finally! I replaced all of the flexible br...  
Front brake hoses part 2: Hidden flexible brake hoses on motorhome-removal:    • Hidden flexible brake hoses on motorhome- ...  
Front brake hoses part 1:    • front brake hoses part 1  
Kitchen countertop installation:    • Motorhome kitchen counter install  
Greasing the front chassis:    • Greasing the front chassis of my 2000 P32 ...  
Window shade installation:    • Window shades for the RV  
Interior finishing details:    • interior finishing details of our 25 year ...  
Videos of the front suspension:
Installation of a new Steering Stabilizer from Safe T Plus:    • steering stabilizer for P32 Workhorse Moto...  
Installation of an Aftermarket Front Anti Sway Bar:    • Front Sway bar Installation for P32 Workho...  
Installing new coil springs and shocks:    • Replacement of front ball joints in workho...  
Replacing the front lower ball joints:    • Replacement of front ball joints in workho...  &t=0
Front Coil Spring removal -    • Front Coil Spring Removal in a 2000 Workho...  
Videos of the rear suspension are below:
Removal of the rear leaf springs to replace the bushings and shackles:    • Leafspring removal with replacement of bus...  &t=0
How the rear anti-sway bar bushings were replaced:    • Rear sway bar bushing replacement in year ...  &t=0
Replacement of the rear shock absorbers:    • Rear shock replacement on year 2000 Workho...  
I removed old rear firestone air springs and replaced them with rear Sumo springs:    • sumo spring installation in Workhorse RV c...  
I replaced the rooftop Air Conditioner:    • Eco cool RV Air Conditioner  

Brake system videos are here:
Front brake hoses part 3: installing the new brake tubes and flexible hoses:    • Finally! I replaced all of the flexible br...  
Front brake hoses part 2: Hidden flexible brake hoses on motorhome-removal:    • Hidden flexible brake hoses on motorhome- ...  
Front Brake Hoses part 1:    • front brake hoses part 1  
Fitting a Workhorse master cylinder with a new hydroboost and original brake pedal linkage    • Fitting a Workhorse master cylinder with a...  
Removing the master cylinder, hydroboost and brake pedal linkage    • P32 Workhorse chassis Master Cylinder & Hy...  
Installing the rear hub, drum and half axle    • Rear drum brake, hub and half axle assembl...  
Removing rear hubs from drum and replacing bearings:    • Replacing rear wheel bearings in a P32 Wor...  
Reassembling the rear brake drum shoes:    • rear brake assembly  
Backplate reinstall with new wheel cylinder and brake lines:    • Reinstalling rear backplate with new wheel...  
The difficult removal of the right rear brake drum is here:    • Removing a P32 Workhorse rear brake drum t...  
The easier removal of the other (left) rear brake drum:    • Rear brake drum removal p32 workhorse chas...  

00:00 Intro
00:27 Disclaimer
00:47 Removing the front wheels
02:20 Removing the brake calipers
03:29 Checking rotor runout
04:06 Removing the dust cap
05:20 Hub and outer bearings off
05:40 Removing the grease seal and inner bearing
06:00 Removing the old races
09:12 Installing new races
12:28 Greasing and installing the new inner bearings
14:30 Installing the new grease seal
15:19 Hubs back on
18:12 Dust cap back on